|
[-]
[+]
|
Changed |
_service:tar_git:droid-config-fp2-sibon.spec
|
|
|
|
[-]
[+]
|
Changed |
_service
^
|
| @@ -5,8 +5,8 @@
</service>
<service name="tar_git">
<param name="url">https://github.com/mlehtima/droid-config-fp2-sibon.git</param>
- <param name="branch">2.0.5</param>
- <param name="revision">dcc63ab424249b8d2bfe7fabcce878686b93db50</param>
+ <param name="branch">master</param>
+ <param name="revision"/>
<param name="token"/>
<param name="debian">N</param>
<param name="dumb">N</param>
|
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-fp2-sibon-0.0.29+2.0.5.20161201200723.2.gdcc63ab.tar.bz2/sparse/etc/bluetooth/audio.conf
^
|
| @@ -1,63 +0,0 @@
-# Configuration file for the audio service
-
-# This section contains options which are not specific to any
-# particular interface
-[General]
-#Enable=Gateway
-# Switch to master role for incoming connections (defaults to true)
-#Master=true
-
-# If we want to disable support for specific services
-# Defaults to supporting all implemented services
-#Disable=Gateway,Source,Socket
-
-# SCO routing. Either PCM or HCI (in which case audio is routed to/from ALSA)
-# Defaults to HCI
-#SCORouting=PCM
-
-# Automatically connect both A2DP and HFP/HSP profiles for incoming
-# connections. Some headsets that support both profiles will only connect the
-# other one automatically so the default setting of true is usually a good
-# idea.
-#AutoConnect=true
-
-# Headset interface specific options (i.e. options which affect how the audio
-# service interacts with remote headset devices)
-[Headset]
-
-# Set to true to support HFP, false means only HSP is supported
-# Defaults to true
-HFP=true
-
-# Maximum number of connected HSP/HFP devices per adapter. Defaults to 1
-MaxConnected=1
-
-# Set to true to enable use of fast connectable mode (faster page scanning)
-# for HFP when incoming call starts. Default settings are restored after
-# call is answered or rejected. Page scan interval is much shorter and page
-# scan type changed to interlaced. Such allows faster connection initiated
-# by a headset.
-FastConnectable=false
-
-# Just an example of potential config options for the other interfaces
-#[A2DP]
-#SBCSources=1
-#MPEG12Sources=0
-
-# Limit features advertised to headsets
-[Telephony]
-Disable=ConferenceCalling,InBandRingtone,EnhancedCallControl
-
-# Where to retrieve battery charge info from
-BatteryInfo=Statefs
-
-# Where to retrieve last dialed number from
-LastDialedNumber=/home/nemo/.cache/last-dialed
-
-# Configure AVRCP features: TG category 1, CT disabled
-[AVRCP]
-EnableTarget=true
-TargetVersion=0x0100
-DisableTargetFeatures=Category2,Category3,Category4,PlayerSettings
-
-EnableControl=false
|
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-fp2-sibon-0.0.29+2.0.5.20161201200723.2.gdcc63ab.tar.bz2/sparse/etc/bluetooth/input.conf
^
|
| @@ -1,9 +0,0 @@
-# Configuration file for the input service
-
-# This section contains options which are not specific to any
-# particular interface
-[General]
-
-# Set idle timeout (in minutes) before the connection will
-# be disconnect (defaults to 0 for no timeout)
-#IdleTimeout=30
|
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-fp2-sibon-0.0.29+2.0.5.20161201200723.2.gdcc63ab.tar.bz2/sparse/etc/bluetooth/jolla.conf
^
|
| @@ -1,5 +0,0 @@
-[General]
-Wakelocks=true
-
-[Security]
-DBusAuthorizedGroups=root,privileged
|
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-fp2-sibon-0.0.29+2.0.5.20161201200723.2.gdcc63ab.tar.bz2/sparse/etc/bluetooth/main.conf
^
|
| @@ -1,65 +0,0 @@
-[General]
-
-# List of plugins that should not be loaded on bluetoothd startup
-#DisablePlugins = network,input
-
-# Default adaper name
-# %h - substituted for hostname
-# %d - substituted for adapter id
-Name=
-
-# Default device class. Only the major and minor device class bits are
-# considered.
-# Phone, smart-phone
-Class = 0x00020c
-
-# How long to stay in discoverable mode before going back to non-discoverable
-# The value is in seconds. Default is 180, i.e. 3 minutes.
-# 0 = disable timer, i.e. stay discoverable forever
-DiscoverableTimeout = 0
-
-# How long to stay in pairable mode before going back to non-discoverable
-# The value is in seconds. Default is 0.
-# 0 = disable timer, i.e. stay pairable forever
-PairableTimeout = 0
-
-# Use some other page timeout than the controller default one
-# which is 16384 (10 seconds).
-PageTimeout = 8192
-
-# Automatic connection for bonded devices driven by platform/user events.
-# If a platform plugin uses this mechanism, automatic connections will be
-# enabled during the interval defined below. Initially, this feature
-# intends to be used to establish connections to ATT channels.
-AutoConnectTimeout = 60
-
-# What value should be assumed for the adapter Powered property when
-# SetProperty(Powered, ...) hasn't been called yet. Defaults to true
-InitiallyPowered = true
-
-# Remember the previously stored Powered state when initializing adapters
-RememberPowered = true
-
-# Use vendor id source (assigner), vendor, product and version information for
-# DID profile support. The values are separated by ":" and assigner, VID, PID
-# and version.
-# Possible vendor id source values: bluetooth, usb (defaults to usb)
-#DeviceID = bluetooth:1234:5678:abcd
-
-# Do reverse service discovery for previously unknown devices that connect to
-# us. This option is really only needed for qualification since the BITE tester
-# doesn't like us doing reverse SDP for some test cases (though there could in
-# theory be other useful purposes for this too). Defaults to true.
-ReverseServiceDiscovery = true
-
-# Enable name resolving after inquiry. Set it to 'false' if you don't need
-# remote devices name and want shorter discovery cycle. Defaults to 'true'.
-NameResolving = true
-
-# Enable runtime persistency of debug link keys. Default is false which
-# makes debug link keys valid only for the duration of the connection
-# that they were created for.
-DebugKeys = false
-
-# Enable the GATT functionality. Default is false
-EnableGatt = false
|
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-fp2-sibon-0.0.29+2.0.5.20161201200723.2.gdcc63ab.tar.bz2/sparse/etc/bluetooth/network.conf
^
|
| @@ -1,6 +0,0 @@
-# Configuration file for the network service
-
-[General]
-
-# Disable link encryption: default=false
-#DisableSecurity=true
|
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-fp2-sibon-0.0.29+2.0.5.20161201200723.2.gdcc63ab.tar.bz2/sparse/etc/bluetooth/rfcomm.conf
^
|
| @@ -1,17 +0,0 @@
-#
-# RFCOMM configuration file.
-#
-
-#rfcomm0 {
-# # Automatically bind the device at startup
-# bind no;
-#
-# # Bluetooth address of the device
-# device 11:22:33:44:55:66;
-#
-# # RFCOMM channel for the connection
-# channel 1;
-#
-# # Description of the connection
-# comment "Example Bluetooth device";
-#}
|
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-fp2-sibon-0.0.29+2.0.5.20161201200723.2.gdcc63ab.tar.bz2/sparse/etc/bluetooth/serial.conf
^
|
| @@ -1,10 +0,0 @@
-# Configuration file for serial
-
-# There could be multiple proxy sections, the format is [Proxy <user chosen name>]
-#[Proxy DUN]
-
-# UUID for DUN proxy service
-#UUID=00001103-0000-1000-8000-00805F9B34FB
-
-# Address for device node
-#Address=/dev/ttyx
|
|
|
Changed |
_service:tar_git:droid-config-fp2-sibon-0.0.29+2.0.5.20161201200723.2.gdcc63ab.tar.bz2/sparse/etc/obexd/excludes/bluetooth:pcsuite
^
|
|
|
Changed |
_service:tar_git:droid-config-fp2-sibon-0.0.29+2.0.5.20161201200723.2.gdcc63ab.tar.bz2/sparse/etc/obexd/noplugins/ftp
^
|
|
|
Changed |
_service:tar_git:droid-config-fp2-sibon-0.0.29+2.0.5.20161201200723.2.gdcc63ab.tar.bz2/sparse/etc/obexd/noplugins/irmc
^
|
|
|
Changed |
_service:tar_git:droid-config-fp2-sibon-0.0.29+2.0.5.20161201200723.2.gdcc63ab.tar.bz2/sparse/etc/obexd/noplugins/mas
^
|
|
|
Changed |
_service:tar_git:droid-config-fp2-sibon-0.0.29+2.0.5.20161201200723.2.gdcc63ab.tar.bz2/sparse/etc/obexd/noplugins/syncevolution
^
|
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-fp2-sibon-0.0.29+2.0.5.20161201200723.2.gdcc63ab.tar.bz2/sparse/etc/obexd/opp.conf
^
|
| @@ -1,2 +0,0 @@
-[OPP]
-DisableFormat=vCal1.0,iCal2.0,vNote,vMessage
|
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-fp2-sibon-0.0.29+2.0.5.20161201200723.2.gdcc63ab.tar.bz2/sparse/etc/obexd/pbap.conf
^
|
| @@ -1,4 +0,0 @@
-[PBAP]
-# By default PBAP server listens for incoming connections at channel 15.
-# That can be overridden by specifying a non-default channel.
-# Channel=21
|
|
[-]
[+]
|
Changed |
_service:tar_git:droid-config-fp2-sibon-0.0.29.tar.bz2/patterns/jolla-hw-adaptation-fp2-sibon.yaml
^
|
| @@ -61,9 +61,9 @@
#- usb-moded-diag-mode-android
# from update13, this is needed explicitly
-#- bluez-configs-sailfish
+- bluez-configs-sailfish
# configurations for OBEX
-#- obexd-configs-sailfish
+- obexd-configs-sailfish
# hammerhead, grouper, and maguro use this in scripts, so include for all
- rfkill
|
