[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/acdbdata
|
-(symlink to /system/etc/acdbdata)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/audio_platform_info.xml
^
|
-(symlink to /system/etc/audio_platform_info.xml)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/bluetooth/audio.conf
^
|
@@ -1,63 +0,0 @@
-# Configuration file for the audio service
-
-# This section contains options which are not specific to any
-# particular interface
-[General]
-#Enable=Gateway
-# Switch to master role for incoming connections (defaults to true)
-#Master=true
-
-# If we want to disable support for specific services
-# Defaults to supporting all implemented services
-#Disable=Gateway,Source,Socket
-
-# SCO routing. Either PCM or HCI (in which case audio is routed to/from ALSA)
-# Defaults to HCI
-#SCORouting=PCM
-
-# Automatically connect both A2DP and HFP/HSP profiles for incoming
-# connections. Some headsets that support both profiles will only connect the
-# other one automatically so the default setting of true is usually a good
-# idea.
-#AutoConnect=true
-
-# Headset interface specific options (i.e. options which affect how the audio
-# service interacts with remote headset devices)
-[Headset]
-
-# Set to true to support HFP, false means only HSP is supported
-# Defaults to true
-HFP=true
-
-# Maximum number of connected HSP/HFP devices per adapter. Defaults to 1
-MaxConnected=1
-
-# Set to true to enable use of fast connectable mode (faster page scanning)
-# for HFP when incoming call starts. Default settings are restored after
-# call is answered or rejected. Page scan interval is much shorter and page
-# scan type changed to interlaced. Such allows faster connection initiated
-# by a headset.
-FastConnectable=false
-
-# Just an example of potential config options for the other interfaces
-#[A2DP]
-#SBCSources=1
-#MPEG12Sources=0
-
-# Limit features advertised to headsets
-[Telephony]
-Disable=ConferenceCalling,InBandRingtone,EnhancedCallControl
-
-# Where to retrieve battery charge info from
-BatteryInfo=Statefs
-
-# Where to retrieve last dialed number from
-LastDialedNumber=/home/nemo/.cache/last-dialed
-
-# Configure AVRCP features: TG category 1, CT disabled
-[AVRCP]
-EnableTarget=true
-TargetVersion=0x0100
-DisableTargetFeatures=Category2,Category3,Category4,PlayerSettings
-
-EnableControl=false
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/bluetooth/input.conf
^
|
@@ -1,9 +0,0 @@
-# Configuration file for the input service
-
-# This section contains options which are not specific to any
-# particular interface
-[General]
-
-# Set idle timeout (in minutes) before the connection will
-# be disconnect (defaults to 0 for no timeout)
-#IdleTimeout=30
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/bluetooth/jolla.conf
^
|
@@ -1,5 +0,0 @@
-[General]
-Wakelocks=true
-
-[Security]
-DBusAuthorizedGroups=root,privileged
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/bluetooth/main.conf
^
|
@@ -1,65 +0,0 @@
-[General]
-
-# List of plugins that should not be loaded on bluetoothd startup
-#DisablePlugins = network,input
-
-# Default adaper name
-# %h - substituted for hostname
-# %d - substituted for adapter id
-Name=
-
-# Default device class. Only the major and minor device class bits are
-# considered.
-# Phone, smart-phone
-Class = 0x00020c
-
-# How long to stay in discoverable mode before going back to non-discoverable
-# The value is in seconds. Default is 180, i.e. 3 minutes.
-# 0 = disable timer, i.e. stay discoverable forever
-DiscoverableTimeout = 0
-
-# How long to stay in pairable mode before going back to non-discoverable
-# The value is in seconds. Default is 0.
-# 0 = disable timer, i.e. stay pairable forever
-PairableTimeout = 0
-
-# Use some other page timeout than the controller default one
-# which is 16384 (10 seconds).
-PageTimeout = 8192
-
-# Automatic connection for bonded devices driven by platform/user events.
-# If a platform plugin uses this mechanism, automatic connections will be
-# enabled during the interval defined below. Initially, this feature
-# intends to be used to establish connections to ATT channels.
-AutoConnectTimeout = 60
-
-# What value should be assumed for the adapter Powered property when
-# SetProperty(Powered, ...) hasn't been called yet. Defaults to true
-InitiallyPowered = true
-
-# Remember the previously stored Powered state when initializing adapters
-RememberPowered = true
-
-# Use vendor id source (assigner), vendor, product and version information for
-# DID profile support. The values are separated by ":" and assigner, VID, PID
-# and version.
-# Possible vendor id source values: bluetooth, usb (defaults to usb)
-#DeviceID = bluetooth:1234:5678:abcd
-
-# Do reverse service discovery for previously unknown devices that connect to
-# us. This option is really only needed for qualification since the BITE tester
-# doesn't like us doing reverse SDP for some test cases (though there could in
-# theory be other useful purposes for this too). Defaults to true.
-ReverseServiceDiscovery = true
-
-# Enable name resolving after inquiry. Set it to 'false' if you don't need
-# remote devices name and want shorter discovery cycle. Defaults to 'true'.
-NameResolving = true
-
-# Enable runtime persistency of debug link keys. Default is false which
-# makes debug link keys valid only for the duration of the connection
-# that they were created for.
-DebugKeys = false
-
-# Enable the GATT functionality. Default is false
-EnableGatt = false
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/bluetooth/network.conf
^
|
@@ -1,6 +0,0 @@
-# Configuration file for the network service
-
-[General]
-
-# Disable link encryption: default=false
-#DisableSecurity=true
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/bluetooth/rfcomm.conf
^
|
@@ -1,17 +0,0 @@
-#
-# RFCOMM configuration file.
-#
-
-#rfcomm0 {
-# # Automatically bind the device at startup
-# bind no;
-#
-# # Bluetooth address of the device
-# device 11:22:33:44:55:66;
-#
-# # RFCOMM channel for the connection
-# channel 1;
-#
-# # Description of the connection
-# comment "Example Bluetooth device";
-#}
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/bluetooth/serial.conf
^
|
@@ -1,10 +0,0 @@
-# Configuration file for serial
-
-# There could be multiple proxy sections, the format is [Proxy <user chosen name>]
-#[Proxy DUN]
-
-# UUID for DUN proxy service
-#UUID=00001103-0000-1000-8000-00805F9B34FB
-
-# Address for device node
-#Address=/dev/ttyx
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/dbus-1/system.d/ohm-policy.conf
^
|
@@ -1,20 +0,0 @@
-<!DOCTYPE busconfig PUBLIC
- "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
- "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
-<busconfig>
- <policy user="root">
- <allow own="org.maemo.resource.manager"/>
- <allow send_interface="org.maemo.resource.client"/>
- </policy>
- <policy context="default">
- <allow send_destination="org.maemo.resource.manager"/>
- <allow send_interface="org.maemo.resource.manager"/>
- <allow receive_sender="org.maemo.resource.manager"/>
- </policy>
- <policy context="default">
- <allow own="com.nokia.policy"/>
- <allow send_destination="com.nokia.policy"/>
- <allow send_interface="com.nokia.policy"/>
- </policy>
-</busconfig>
-
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/dconf/db/vendor.d/locks/screen-rotation.txt
^
|
@@ -1 +0,0 @@
-/desktop/jolla/components/screen_rotation_angle
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/dconf/db/vendor.d/locks/silica-configs.txt
^
|
@@ -1,2 +0,0 @@
-/desktop/sailfish/silica/theme_pixel_ratio
-/desktop/sailfish/silica/theme_icon_subdir
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/dconf/db/vendor.d/screen-rotation.txt
^
|
@@ -1,2 +0,0 @@
-[desktop/jolla/components]
-screen_rotation_angle=0
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/dconf/db/vendor.d/silica-configs.txt
^
|
@@ -1,4 +0,0 @@
-[desktop/sailfish/silica]
-theme_pixel_ratio=@PIXEL_RATIO@
-theme_icon_subdir='z@ICON_RES@'
-
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/gps.conf
^
|
-(symlink to /system/etc/gps.conf)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/izat.conf
^
|
-(symlink to /system/etc/izat.conf)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/media_codecs.xml
^
|
-(symlink to /system/etc/media_codecs.xml)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/media_codecs_ffmpeg.xml
^
|
-(symlink to /system/etc/media_codecs_ffmpeg.xml)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/media_codecs_google_audio.xml
^
|
-(symlink to /system/etc/media_codecs_google_audio.xml)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/media_codecs_google_telephony.xml
^
|
-(symlink to /system/etc/media_codecs_google_telephony.xml)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/media_codecs_google_video.xml
^
|
-(symlink to /system/etc/media_codecs_google_video.xml)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/media_profiles.xml
^
|
-(symlink to /system/etc/media_profiles.xml)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/mixer_paths.xml
^
|
-(symlink to /system/etc/mixer_paths.xml)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/modprobe.d/blacklist-evbug.conf
^
|
@@ -1,2 +0,0 @@
-# evbug is a debug tool that should be loaded explicitly
-blacklist evbug
|
|
Changed |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/obexd/excludes/bluetooth:pcsuite
^
|
|
Changed |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/obexd/noplugins/ftp
^
|
|
Changed |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/obexd/noplugins/irmc
^
|
|
Changed |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/obexd/noplugins/mas
^
|
|
Changed |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/obexd/noplugins/syncevolution
^
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/obexd/opp.conf
^
|
@@ -1,2 +0,0 @@
-[OPP]
-DisableFormat=vMessage
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/obexd/pbap.conf
^
|
@@ -1,4 +0,0 @@
-[PBAP]
-# By default PBAP server listens for incoming connections at channel 15.
-# That can be overridden by specifying a non-default channel.
-# Channel=21
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/ohm/dbus_signal_conf.ini
^
|
@@ -1,15 +0,0 @@
-[topmost_signal]
-name = privateTopmostWindowProcessIdChanged
-path = /
-interface = org.nemomobile.compositor
-signature = i
-arguments = pid
-target = active_application_request
-
-[alien_signal]
-name = alienProcessIdChanged
-path = /org/nemomobile/policy
-interface = org.nemomobile.policy
-signature = i
-arguments = pid
-target = alien_application_request
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/ohm/modules.ini
^
|
@@ -1,7 +0,0 @@
-# The OHM system modules configuration file
-
-[Modules]
-PerformExtraChecks=true
-ModulesBanned=gconf
-ModulesSuggested=
-ModulesRequired=*
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/ohm/ohmd.ini
^
|
@@ -1,2 +0,0 @@
-[options]
-mlock = data,future
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/ohm/plugins.d/dbus_signal.ini
^
|
@@ -1 +0,0 @@
-filename = /etc/ohm/dbus_signal_conf.ini
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/pulse/arm_droid_default.pa
^
|
@@ -1,120 +0,0 @@
-#!/usr/bin/pulseaudio -nF
-#
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-# This startup script is used only if PulseAudio is started per-user
-# (i.e. not in system mode)
-
-.nofail
-
-.fail
-
-load-module module-droid-keepalive
-
-load-module module-meego-parameters cache=1 directory=/var/lib/nemo-pulseaudio-parameters use_voice=false
-load-module module-meego-mainvolume virtual_stream=true
-
-### Automatically restore the volume of streams
-# load configuration based on bluez version
-.ifexists /etc/pulse/bluez4_stream_restore.pa
-.include /etc/pulse/bluez4_stream_restore.pa
-.endif
-
-.ifexists /etc/pulse/bluez5_stream_restore.pa
-.include /etc/pulse/bluez5_stream_restore.pa
-.endif
-
-load-module module-match table=/etc/pulse/x-maemo-match.table key=application.name
-
-### Automatically augment property information from .desktop files
-### stored in /usr/share/application
-load-module module-augment-properties
-
-load-module module-null-sink sink_name=sink.null rate=48000
-
-load-module module-droid-card rate=48000 mute_routing_before=24576 mute_routing_after=4096
-
-### Needed on many new devices. HADK guide explains how to implement this fully
-.ifexists module-droid-glue.so
-load-module module-droid-glue
-.endif
-
-load-module module-null-sink sink_name=sink.fake.sco rate=8000 channels=1
-load-module module-null-source source_name=source.fake.sco rate=8000 channels=1
-load-module module-bluez4-discover sco_sink=sink.fake.sco sco_source=source.fake.sco
-
-load-module module-combine-sink sink_name=sink.primaryandbluez resample_method=trivial rate=48000 channels=2 ignore=sink.low_latency
-
-load-module module-policy-enforcement
-
-load-module module-role-ducking trigger_roles=alarm,notification,warning ducking_roles=x-maemo volume=-200dB
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-### Network access (may be configured with paprefs, so leave this commented
-### here if you plan to use paprefs)
-#load-module module-esound-protocol-tcp
-#load-module module-native-protocol-tcp
-
-### Load the RTP receiver module (also configured via paprefs, see above)
-#load-module module-rtp-recv
-
-### Load the RTP sender module (also configured via paprefs, see above)
-#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
-#load-module module-rtp-send source=rtp.monitor
-
-### Load additional modules from GConf settings. This can be configured with the paprefs tool.
-### Please keep in mind that the modules configured by paprefs might conflict with manually
-### loaded modules.
-.ifexists module-gconf.so
-.nofail
-load-module module-gconf
-.fail
-.endif
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Honour intended role device property
-load-module module-intended-roles
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle timeout=1
-
-### If autoexit on idle is enabled we want to make sure we only quit
-### when no local session needs us anymore.
-.ifexists module-console-kit.so
-load-module module-console-kit
-.endif
-.ifexists module-systemd-login.so
-load-module module-systemd-login
-.endif
-
-### Load DBus protocol
-.ifexists module-dbus-protocol.so
-load-module module-dbus-protocol
-.endif
-
-load-module module-rescue-streams sink_name=sink.null source_name=sink.null.monitor
-
-### Make some devices default
-set-default-sink sink.primary
-set-default-source source.primary
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/pulse/bluez4_stream_restore.pa
^
|
@@ -1,2 +0,0 @@
-### Bluez4 specific module arguments
-load-module module-stream-restore-nemo restore_device=no restore_volume=yes restore_muted=no route_table=/etc/pulse/x-maemo-route.table fallback_table=/etc/pulse/x-maemo-stream-restore.table use_voice=false sink_volume_table=/etc/pulse/x-maemo-sink-volume.table
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/pulse/bluez5_stream_restore.pa
^
|
@@ -1,2 +0,0 @@
-### Bluez5 specific module arguments
-load-module module-stream-restore-nemo restore_device=no restore_volume=yes restore_muted=no route_table=/etc/pulse/x-maemo-route.table fallback_table=/etc/pulse/x-maemo-stream-restore.table use_voice=false
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/pulse/mainvolume-listening-time-notifier.conf
^
|
@@ -1,3 +0,0 @@
-timeout = 1200
-role-list = x-maemo
-mode-list = lineout,hs
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/pulse/x-maemo-match.table
^
|
@@ -1,4 +0,0 @@
-telepathy-stream-engine "phone"
-tonegend "dtmf-tone"
-voicehost "phone"
-. "x-maemo"
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/pulse/x-maemo-route.table
^
|
@@ -1,2 +0,0 @@
-sink-input-by-media-role:x-maemo -25
-sink-input-by-media-role:phone -15
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/pulse/x-maemo-sink-volume.table
^
|
@@ -1,3 +0,0 @@
-btmono:sink.fake.sco
-btmono-hfp:sink.fake.sco
-btmono-hsp:sink.fake.sco
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/pulse/x-maemo-stream-restore.table
^
|
@@ -1,5 +0,0 @@
-sink-input-by-media-role:x-maemo -20
-sink-input-by-media-role:phone -15
-sink-input-by-media-role:animation -20
-
-
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/pulse/xpolicy.conf
^
|
@@ -1,688 +0,0 @@
-# -------- Group section -------------------------------------------------------
-
-[group]
-name = idle
-flags = nopolicy
-sink = sink.null
-source = sink.null.monitor
-
-[group]
-name = background
-flags = limit_volume, cork_stream
-sink = sink.primary
-source = source.primary
-
-[group]
-name = systemsound
-flags = set_sink, limit_volume, cork_stream, mute_by_route
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = btnotify
-flags = set_sink, limit_volume, cork_stream, mute_by_route
-sink = sink.primaryandbluez
-source = sink.null.monitor
-
-[group]
-name = feedbacksound
-flags = route_audio, limit_volume, cork_stream, mute_by_route
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = inputsound
-flags = set_sink, limit_volume, cork_stream, mute_by_route
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = event
-flags = set_sink, limit_volume, cork_stream, mute_by_route
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = alarm
-flags = set_sink, limit_volume, cork_stream
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = flash
-flags = limit_volume, cork_stream
-sink = sink.primary
-source = source.primary
-
-[group]
-name = player
-flags = route_audio, limit_volume, cork_stream
-sink = sink.primary
-source = source.primary
-
-[group]
-name = game
-flags = route_audio, limit_volume, cork_stream
-sink = sink.primary
-source = source.primary
-
-[group]
-name = voiceui
-flags = set_sink, limit_volume, cork_stream
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = ringtone
-flags = limit_volume, mute_by_route, cork_stream, media_notify
-sink = sink.primary
-source = source.null.monitor
-
-[group]
-name = camera
-flags = set_sink, set_source, limit_volume, cork_stream
-sink = sink.primary
-source = source.primary
-
-[group]
-name = videoeditor
-flags = route_audio, limit_volume, cork_stream
-sink = sink.primary
-source = source.primary
-
-[group]
-name = ipcall
-flags = set_sink, set_source, limit_volume, cork_stream
-sink = sink.primary
-source = source.primary
-
-[group]
-name = call
-flags = set_sink, set_source
-sink = sink.primary
-source = source.primary
-
-[group]
-name = navigator
-flags = set_sink, set_source
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = cstone
-flags = route_audio, set_source, limit_volume
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = alwayson
-flags = set_sink, limit_volume, cork_stream
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = nonsilent
-flags = set_sink, limit_volume, cork_stream
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = internal
-flags = nopolicy
-sink = sink.null
-source = source.null.monitor
-
-[group]
-name = outgoing
-flags = route_audio
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = incoming
-flags = route_audio
-sink = sink.null
-source = source.primary
-
-[group]
-name = alien
-flags = route_audio, limit_volume, cork_stream
-sink = sink.primary
-source = source.primary
-
-[group]
-name = aliencall
-flags = route_audio, limit_volume, cork_stream
-sink = sink.primary
-source = source.primary
-
-
-# -------- Card section --------------------------------------------------------
-
-[card]
-type = tvoutandbta2dp
-name = startswith:"bluez_card"
-profile = a2dp
-flags = disable_notify
-
-
-[card]
-type = bta2dp
-name0 = startswith:"bluez_card"
-profile0 = a2dp
-name1 = equals:droid_card.primary
-profile1 = primary-primary
-
-[card]
-type = bta2dpforalien
-name0 = startswith:"bluez_card"
-profile0 = a2dp
-name1 = equals:droid_card.primary
-profile1 = communication
-
-[card]
-type = tvoutandbthsp
-name = startswith:"bluez_card"
-profile = hsp
-flags = disable_notify
-
-[card]
-type = ihfandbthsp
-name0 = startswith:"bluez_card"
-profile0 = hsp
-name1 = equals:droid_card.primary
-profile1 = primary-primary
-flags = disable_notify
-
-[card]
-type = bthsp
-name0 = startswith:"bluez_card"
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/sap.conf
^
|
-(symlink to /system/etc/sap.conf)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/sec_config
^
|
-(symlink to /system/etc/sec_config)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/sensorfw/primaryuse.conf
^
|
@@ -1,15 +0,0 @@
-[plugins]
-accelerometeradaptor = hybrisaccelerometeradaptor
-alsadaptor = hybrisalsadaptor
-proximityadaptor = hybrisproximityadaptor
-magnetometeradaptor = hybrismagnetometeradaptor
-gyroscopeadaptor = hybrisgyroscopeadaptor
-orientationadaptor = hybrisorientationadaptor
-
-[magnetometer]
-scale_coefficient = 1
-transformation_matrix = "-1,0,0,0,1,0,0,0,1"
-needs_calibration = 0
-
-[accelerometer]
-transformation_matrix = "1,0,0,0,1,0,0,0,1"
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/sysconfig/pulseaudio
^
|
@@ -1 +0,0 @@
-CONFIG="-n --file=/etc/pulse/arm_droid_default.pa"
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/sysctl.d/ipv4-settings.conf
^
|
@@ -1,5 +0,0 @@
-# Disable icmp redirects
-net.ipv4.conf.default.accept_redirects = 0
-net.ipv4.conf.all.accept_redirects = 0
-net.ipv4.conf.default.secure_redirects = 0
-net.ipv4.conf.all.secure_redirects = 0
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/sysctl.d/ipv6-settings.conf
^
|
@@ -1,7 +0,0 @@
-# Enable IPv6 tempaddress and prefer it
-net.ipv6.conf.default.use_tempaddr = 2
-net.ipv6.conf.all.use_tempaddr = 2
-
-# Disable icmp redirects
-net.ipv6.conf.default.accept_redirects = 0
-net.ipv6.conf.all.accept_redirects = 0
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/usb-moded/dyn-modes/mtp_mode-droid.ini
^
|
@@ -1,12 +0,0 @@
-[mode]
-name = mtp_mode
-module = none
-
-[options]
-sysfs_path = /sys/class/android_usb/android0/functions
-sysfs_value = ffs
-sysfs_reset_value = none
-softconnect_path = /sys/class/android_usb/android0/enable
-softconnect = 1
-softconnect_disconnect = 0
-idProduct = 0A07
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/xdg/QtProject/QtQuick2.conf
^
|
@@ -1,2 +0,0 @@
-[QuickMouseArea]
-PressAndHoldDelay=600
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/xdg/QtProject/Sensors.conf
^
|
@@ -1,10 +0,0 @@
-[Default]
-QAccelerometer=sensorfw.accelerometer
-QAmbientLightSensor=sensorfw.als
-QCompass=sensorfw.compass
-QMagnetometer=sensorfw.magnetometer
-QOrientationSensor=sensorfw.orientationsensor
-QProximitySensor=sensorfw.proximitysensor
-QRotationSensor=sensorfw.rotationsensor
-QLightSensor=sensorfw.lightsensor
-QGyroscope=sensorfw.gyroscope
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/xtra_root_cert.pem
^
|
-(symlink to /system/etc/xtra_root_cert.pem)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/etc/xtwifi.conf
^
|
-(symlink to /system/etc/xtwifi.conf)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/environment/nemo/60-multimedia.conf
^
|
@@ -1,3 +0,0 @@
-QT_GSTREAMER_CAMERABIN_SRC=droidcamsrc
-QT_GSTREAMER_PLAYBIN_FLAGS=0
-QT_GSTREAMER_CAMERABIN_FLAGS=15
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/nemo-pulseaudio-parameters/algs/mainvolume/bta2dp
^
|
@@ -1,3 +0,0 @@
-x-nemo.mainvolume.call = "0:-6000,1:-1400,2:-800,3:-450,4:-190,5:0"
-x-nemo.mainvolume.media = "0:-20000,1:-5850,2:-5525,3:-5200,4:-4875,5:-4550,6:-4225,7:-3900,8:-3575,9:-3250,10:-2925,11:-2600,12:-2275,13:-1950,14:-1625,15:-1300,16:-975,17:-650,18:-325,19:0"
-x-nemo.mainvolume.high-volume-step = "15"
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/nemo-pulseaudio-parameters/algs/mainvolume/btmono
^
|
@@ -1,2 +0,0 @@
-x-nemo.mainvolume.call = "0:-20000,1:-6175,2:-4875,3:-3625,4:-3025,5:-2425,6:-2025,7:-1815,8:-1625,9:-1200,10:-1025,11:-700,12:-575,13:-250,14:-125,15:0"
-x-nemo.mainvolume.media = "0:-20000,1:-6175,2:-4875,3:-4225,4:-3625,5:-3025,6:-2425,7:-1815,8:-1625,9:-1200,10:-1025,11:-700,12:-575,13:-450,14:-225,15:0"
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/nemo-pulseaudio-parameters/algs/mainvolume/hp
^
|
@@ -1,2 +0,0 @@
-x-nemo.mainvolume.call = "0:-6000,1:-1400,2:-800,3:-450,4:-190,5:0"
-x-nemo.mainvolume.media = "0:-6175,1:-5850,2:-5525,3:-5200,4:-4875,5:-4550,6:-4225,7:-3900,8:-3575,9:-3250,10:-2925,11:-2600,12:-2275,13:-1950,14:-1625,15:-1300,16:-975,17:-650,18:-325,19:0"
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/nemo-pulseaudio-parameters/algs/mainvolume/ihf
^
|
@@ -1,2 +0,0 @@
-x-nemo.mainvolume.call = "0:-6000,1:-1400,2:-800,3:-450,4:-190,5:0"
-x-nemo.mainvolume.media = "0:-20000,1:-3800,2:-3187,3:-2648,4:-2158,5:-1716,6:-1324,7:-932,8:-612,9:-368,10:-122,11:0"
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/nemo-pulseaudio-parameters/algs/mainvolume/lineout
^
|
@@ -1,3 +0,0 @@
-x-nemo.mainvolume.call = "0:-6000,1:-1400,2:-800,3:-450,4:-190,5:0"
-x-nemo.mainvolume.media = "0:-20000,1:-5500,2:-5000,3:-4500,4:-4000,5:-3600,6:-3200,7:-2800,8:-2500,9:-2200,10:-1900,11:-1600,12:-1300,13:-1100,14:-950,15:-800,16:-600,17:-400,18:-200,19:0"
-x-nemo.mainvolume.high-volume-step = "12"
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/nemo-pulseaudio-parameters/modes/bta2dp/mainvolume
^
|
-(symlink to ../../algs/mainvolume/bta2dp)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/nemo-pulseaudio-parameters/modes/btmono-hfp/mainvolume
^
|
-(symlink to ../../algs/mainvolume/btmono)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/nemo-pulseaudio-parameters/modes/btmono-hsp/mainvolume
^
|
-(symlink to ../../algs/mainvolume/btmono)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/nemo-pulseaudio-parameters/modes/btmono/mainvolume
^
|
-(symlink to ../../algs/mainvolume/btmono)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/nemo-pulseaudio-parameters/modes/hp/mainvolume
^
|
-(symlink to ../../algs/mainvolume/hp)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/nemo-pulseaudio-parameters/modes/hs/mainvolume
^
|
-(symlink to ../../algs/mainvolume/lineout)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/nemo-pulseaudio-parameters/modes/ihf/mainvolume
^
|
-(symlink to ../../algs/mainvolume/ihf)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/nemo-pulseaudio-parameters/modes/ihfandbtmono-hfp/mainvolume
^
|
-(symlink to ../../algs/mainvolume/btmono)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/nemo-pulseaudio-parameters/modes/ihfandbtmono-hsp/mainvolume
^
|
-(symlink to ../../algs/mainvolume/btmono)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/nemo-pulseaudio-parameters/modes/ihfandbtmono/mainvolume
^
|
-(symlink to ../../algs/mainvolume/btmono)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/nemo-pulseaudio-parameters/modes/ihfandheadset/mainvolume
^
|
-(symlink to ../../algs/mainvolume/ihf)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/nemo-pulseaudio-parameters/modes/ihfandlineout/mainvolume
^
|
-(symlink to ../../algs/mainvolume/ihf)
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-mako-0.0.13.tar.bz2/sparse/var/lib/nemo-pulseaudio-parameters/modes/lineout/mainvolume
^
|
-(symlink to ../../algs/mainvolume/lineout)
|